inS_cnge8MS_reV–
09/17/12 Page 40
INSTALLATION AND OPERATION MANUAL
CNGE8MS
Tech SupporT: 1.888.678.9427
Forwarding Delay
Time (4-30)
The number of seconds a port waits before changing from its Rapid
Spanning-Tree Protocol learning and listening states to the forwarding
state. Enter a value between 4 through 30.
Path Cost
(1-200000000)
The cost of the path to the other bridge from this transmitting bridge
at the specified port. Enter a number 1 through 200000000.
Priority (0-240)
Decide which port should be blocked by priority in LAN. Enter a
number 0 through 240. The value of priority must be the multiple of
16
Admin P2P
Some of the rapid state transactions that are possible within RSTP are
dependent upon whether the port concerned can only be connected
to exactly one other bridge (i.e. It is served by a point-to-point LAN
segment), or it can be connected to two or more bridges (i.e. It is
served by a shared medium LAN segment). This function allows the
P2P status of the link to be manipulated administratively. True means
P2P enabling. False means P2P disabling.
Admin Edge
The port directly connected to end stations, and it cannot create
bridging loop in the network. To configure the port as an edge port,
set the port to “True”.
Admin Non STP The port includes the STP mathematical calculation. True is not
including STP mathematical calculation. False is including the STP
mathematical calculation.
Apply
Select
Apply
to set the configurations.
NOTE: Follow the rule to configure the MAX Age, Hello Time, and Forward Delay Time.
2
×
(Forward Delay Time value — 1) > = Max Age value >= 2
×
(Hello Time value + 1)
