www.commscope.com
860106376
Issue 6, December 2012
Page 11 of 13
Terminating and Installing the Cable
To terminate and install the fiber optic cable:
1. Install appropriate (SC or LC) connectors on the buffered fibers.
2. Affix the 2 adhesive-backed wire retainers to the shelf approximately in the position shown in Figure 11.
3. Route the buffered fibers through the wire retainers and around the storage drums to the adapters on
the back of the faceplate (Figure 11).
4. Connect the terminated fibers to the adapters on the back of the faceplate.
Figure 11 Routing the Terminated Fibers
Terminated
fibers
Faceplate
Wire retainers (2)
