www.commscope.com
860106376
Issue 6, December 2012
Page 9 of 13
1
2
11
12
1
2
11
12
1
12
13
24
7
12
1
6
Fusion splice organizers
Mass fusion splice organizers
Mechanical splice organizers
To splice and install the fiber optic cable:
1. On a clean work surface, prepare the incoming buffered
fibers for splicing to the fiber pigtail by untangling them and
laying them out flat.
2. Using the splicing materials appropriate for the type of
splices you are making, splice the incoming buffered fibers
to the pigtail.
3. For fusion splices, use your fingers to place the splices in
the splice organizers (ordered separately) in the
recommended sequence shown in Figure 9.
Note:
The numbers shown in Figure 9 do not appear on
the actual splice organizers.
Note:
Each fusion splice organizer has four
spare positions.
For rotary/ mechanical splices, use a 1012A compression
tool to compress the springs on the splices and place the
splices in the splice organizers (ordered separately) in the
recommended sequence shown in Figure 9.
Figure 9 Splice Sequence for Fusion
Mass Fusion and Mechanical Splice
Organizers
