Commencal ABSOLUT, Инструкция по эксплуатации и техническому обслуживанию

Страница: 10 / 37

First of all, you have to unpack and assemble your bike before to proceed
to settings.
1. Open the box and insert the seatpost in the seat tube. Hanging the
saddle will help you to take out the bike from the box.
2. Cut the plastic collar hanging on the front wheel.
3. Loosen the top cap on the stem in order to turn the stem and to place it
in the right position. Then tighten the top cap.
4. Loosen the stem cap in order to fit the handlebars. Then replace the cap
without tightening the screws too much.
5. Centre the handlebar and finish by tightening the four screws by
alternating the screws in order to keep the same space on top and bottom
betwen the stem and the handlebar.
6. Take the disc brake and the 6 screws from the box.
7. Place the disc on the hub. Then, position the disc holes in front of the
hub hole.
8. Tighten the 6 screws (not too much).
9. Once the 6 screws are in place, you can finish by tightening all of them.
10. Remove the spacer between the brake pad in the caliper of the front
wheel
11. Fix the front wheel on the fork. Pay attention to the fact that the disc
has to be inserted between the brake pads in the Caliper. Tighten the quick
release.
UNPACK AND ASSEMBLE YOUR BIKE
UNPACK AND ASSEMBLE
A video that can help you to unpack and assemble your bike is available
here.
DROPPER SEATPOST
Some of our models are mounted with a dropper seatpost. In this case,
you may need to watch one of the following tutorials in order to mount and
adjust your seatpost properly
- Full installation of a ROCKSHOX REVERB seatpost for a META V4 frame
available here.
- Full installation of a
KS Lev integra
seatpost for a META V4 frame
available here.
- Installing a
KS Lev integra
seatpost for a META V3 (AM, SX, GIRLY,
HIPHOP) available here.
CHAINSTAY PROTECTOR
For a META V4 (AM or TRAIL) you will need to mount a chainstay protector
by following the tutorial video available here .
MUDGUARD
Click here to watch the video explaining how to mount a mudguard on an
Uptown.
RAMONES 12
An explanation of how to mount a RAMONES 12 with or without disc brakes
can be found by clicking here .
N.B Please keep the bike box once you’ve assembled it. This box can be
useful in case you need to return it because of an aftersales issue.
10 UNPACK AND ASSEMBLE YOUR BIKE
VIDEO TUTORIALS