901915-01B
For more information, visit www.desatech.com
For more information, visit www.desatech.com
3
3
SAFETY INFORMATION
UNPACKING
PRODUCT IDENTIFICATION
LOCAL CODES
PRODUCT IDENTIFICATION
Figure 1 - Product Identification (HFVMR24 Shown)
UNPACKING
CAUTION: Do not remove the data plates from the
burner pan. The data plates contain important war-
ranty and safety information.
1.
Remove logs, hearth kit, pan materials, and hardware from
carton.
2.
Remove all protective packaging applied to logs and base for
shipment.
3.
Check all items for any shipping damage. If damaged, promptly
inform dealer where you bought the product.
LOCAL CODES
Install and use log set with care. Follow all local codes. In the absence
of local codes, use the latest edition of The National Fuel Gas Code,
ANSI Z223.1/NFPA 54*.
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
Batterymarch Park
Quincy, MA 02269
Hearth Kit Model: _______________________
Serial Number: _________________________
Log Set Model: HFVMR18 or HFVMR24
Grate
Burner
Pan
Burner Manifold
Right Side Burner
Left Side
Burner
Burner Inlet
Fitting
8.
Do not allow fans to blow directly into the fireplace. Avoid
any drafts that alter burner flame patterns. Ceiling fans can
create drafts that alter burner flame patterns. Altered burner
patterns can increase sooting.
9.
Do not use a blower insert, heat exchanger insert or other ac-
cessory not approved for use with this log set.
10. This log set needs fresh, outside air ventilation to run properly.
See Air for Combustion and Ventilation, page 4.
11. Do not run log set
• where flammable liquids or vapors are used or stored
• under dusty conditions
12. Do not burn solid fuel in the fireplace after installing the log
set. Do not use this log set to cook food or burn paper or other
objects.
13. Log set becomes very hot when in use. Keep children and adults
away from hot surface to avoid burns or clothing ignition. Log
set will remain hot for a time after shutdown. Allow surface to
cool before touching.
14. Carefully supervise young children when they are in the room
with log set.
15. Do not use appliance if any part has been exposed to or under
water. Immediately call a qualified service technician to inspect
the room appliance and to replace any part of the control sys-
tem (if using GA9050 or GA9150) and any gas control which
has been under water.
16. To help prevent breakage, new logs must be broken-in (see
Curing Logs, page 9).
17. Turn log set off and let cool before servicing, installing, or repair-
ing. Only a qualified service person should install, service, or re-
pair log set.
SAFETY INFORMATION
Continued
