COMFORT-AIRE GUH95C Скачать руководство пользователя

Страница: 10 / 58

507716-01

Page 10 of 58

Issue 1717

Figure 12. Setting Equipment

Tilt the unit slightly (Max. 1/2”) from back to front to aid in the draining of the heat exchanger.

Unit must be level side-to-side in all applications.

Improper installation of the furnace can result in

personal injury or death. Combustion and flue products

must never be allowed to enter the return air system or

air in the living space. Use sheet metal screws and joint

tape to seal return air system to furnace.
In platform installations with furnace return, the furnace

should be sealed airtight to the return air plenum. A door

must never be used as a portion of the return air duct

system. The base must provide a stable support and an

airtight seal to the furnace. Allow absolutely no sagging,

cracks, gaps, etc.
For no reason should return and supply air duct systems

ever be connected to or from other heating devices

such as a fireplace or stove, etc. Fire, explosion, carbon

monoxide poisoning, personal injury and/or property

damage could result.

WARNING

Figure 13. Installation Clearances

Upflow Applications

Top

Bottom (Floor)

Left Side

Right Side

Top/Plenum

1 in. (25 mm)

*Front

Back

Sides

†

Vent

Floor

‡

*Front clearance in alcove installation must be 24 in. (610 mm).

Maintain a minimum of 24 in. (610 mm) for front service access.

†

Allow proper clearances to accommodate condensate trap.

‡

For installations on a combustible floor, do not install the furnace directly

on carpeting, tile or other combustible materials other than wood

flooring.

Top/Plenum

1 in. (25 mm)

* Front

Back

Sides

0†

Vent

Floor

0‡

* Front clearance in alcove installation must be 24 in. (610

mm). Maintain a minimum of 24 in. (610 mm) for front service

access.
† Allow proper clearances to accommodate condensate trap.
‡ For installations on a combustible floor, do not install

the furnace directly on carpeting, tile or other combustible

materials other than wood flooring.

Содержание GUH95C



























































Результаты поиска

Содержание GUH95C

Отзывы:

Похожие инструкции для GUH95C

Бренды по названию

Популярные бренды

COMFORT-AIRE GUH95C, Руководство по установке

Результаты поиска

Содержание GUH95C

Отзывы:

Похожие инструкции для GUH95C

Бренды по названию

Популярные бренды