Comelit IPTHBCAMA05F01A, Руководство пользователя

Страница: 57 / 76

51
5.6.2 Port
Go to Config

Network

Port interface as shown below. HTTP port, Data port and
RTSP port can be set.
HTTP Port : The default HTTP port is 80. It can be changed to any port which is not
occupied.
HTTPS Port : The default HTTPs port is 443. It can be changed to any port which is
not occupied.
Data Port : The default data port is 9008. Please change it as necessary.
RTSP Port : The default port is 554. Please change it as necessary.
5.6.3 Server Configuration
This function is mainly used for connecting network video management system.
1. Check “Enable”.
2. Check the IP address and port of the transfer media server in the Comelit Advance
VMS. Then enable the auto report when adding a new device. Next, enter the
remaining information of the device in the Comelit Advance VMS. After that, the
system will automatically allot a device ID. Please check it in the software.
3. Enter the above-mentioned server address, server port and device ID in the
corresponding boxes. Click the “Save” button to save the settings.
5.6.4 DDNS
If the camera is set up with a DHCP connection, DDNS should be set for the internet.
1. Go to Config

Network

DDNS.