Comelit IPTHBCAMA05F01A, Руководство пользователя

Страница: 18 / 76

12
1.
Enable “Temperature Measurement”, select Celsius or Fahrenheit temperature
as needed and then set the high temperature threshold and the low temperature
threshold. When the body temperature measured is higher or lower than the set value,
it will trigger alarms.
2.
Set the alarm holding time.
3. Set the alarm trigger options.
Trigger Alarm Out: If enabled, the alarm output device will be triggered when
detecting abnormal temperature.
Trigger Audio Alarm : If enabled, the warning voice will be triggered when the
temperature exceeds the set value. (Please set the warning voice first. See Audio
Alarm for details)
Trigger Light Alarm: If enabled, the light of the camera will flash when the
temperature exceeds the set value. (Please set the light flashing time and frequency
first. See
Light Alarm for details)
Trigger SD Snap : If enabled, the system will capture images on detecting abnormal
temperature alarm and save the images on an micro-SD card.
Trigger SD Recording : If selected, video will be recorded on an micro-SD card on
detecting abnormal temperature alarm.
Trigger Email : If
“Trigger Email” and “Attach Picture” are checked (email address
must be set first in the Email configuration interface), the captured pictures and
triggered event will be sent into those addresses.
Trigger FTP : If
“Trigger FTP” is checked, the captured pictures will be sent into FTP