39
3.
Set alarm holding time and alarm trigger options. The setup steps are the same
as alarm in (sensor alarm) detection. Please refer to
chapter for details.
4. Set alarm detection area.
Click “Draw Area” and drag the border lines of the rectangle to modify its size. Move
the rectangle to change its position. Click “Stop Draw” to stop drawing the area. Click
“Clear” to clear the area. Then set the detectable face size by defining the maximum
value and the minimum value (The default size range of a single face image occupies
from 3% to 50% of the entire image).
5.
Advanced settings. Choose the snapshot interval and number as needed to
avoid capturing multiple similar pictures in a very short period of time.
Snapshot Interval
: If 5 seconds is selected, the camera will capture the same target
once every 5 seconds during its continuous tracking period.
Snapshot Number
: If the snapshot number is enabled and set (eg. 3), the camera will
capture the same target once every 5 seconds and it will capture this target 3 times at
Содержание IPTHBCAMA05F01A
Страница 24: ...18...
