Comelit IPTHBCAMA05F01A, Руководство пользователя

Страница: 53 / 76

47
detection area setting steps are the same as the area setup of intrusion detection.
6. Set the schedule of the region entrance detection. The setup steps of the schedule
are the same as schedule recording setup (See
Schedule Recording ).
* The configuration requirements of camera and surrounding area are the same as
intrusion detection.
5.5.6 Region Exiting Detection Settings
Region Exiting : Alarms will be triggered if the target exits from the pre-defined areas.
Go to Config

Event

Region Exiting interface as shown below.
1. Enable region exiting detection and select the snapshot type and the detection
target.
2. Set the alarm holding time.
3. Set alarm trigger options. The setup steps are the same as alarm in (sensor alarm)
detection. Please refer to
Alarm IN chapter for details.
4. Click the “Save” button to save the settings.
5. Set the alarm area of the region exiting detection.
Click the “Area” tab to go to the
interface as shown below.
Set the alarm area number on the right side. Up to 4 alarm areas can be added. The
detection area setting steps are the same as the area setup of intrusion detection.
6. Set the schedule of the region exiting detection. The setup steps of the schedule
are the same as schedule recording setup (See
Schedule Recording ).