Comelit IPTHBCAMA05F01A, Руководство пользователя

Страница: 55 / 76

49
Set the alarm line number and direction. Only one alarm line can be added.
Direction
：
A->B and A<-B can be optional. The direction of the arrow is entrance.
Click the “Draw Area” button and then drag the mouse to draw a line in the image.
Click the “Stop Draw” button to stop drawing. Click the “Clear” button to delete the
lines.
Statistics: If enabled, you can see the statistical information in the live view interface. If
disabled, the statistical information will not be displayed in the live view interface.
Check “Statistics” and then move the red box to change the position of the statistical
information displayed on the screen.
Click the “Save” button to save the settings.
Note
: If the OSD content4 is enabled, it will be disabled after you enable “Statistics”.
4. Set the schedule of the target counting. The setup steps of the schedule are the
same as schedule recording setup (See
Schedule Recording ).
5. View the statistical information in the live view interface.
5.6 Network Configuration
5.6.1 TCP/IP
Go to Config

Network

TCP/IP interface as shown below. There are two ways
for network connection.