Comdial Impression Скачать руководство пользователя

Страница: 81 / 120

•

There are eight group listening loudness levels. Set them for
the current call as follows:

— while on a call, press VOLUME UP or VOLUME DOWN

once for each change in loudness (eight different levels
available) that you desire.

You can make a change in the loudness that remains until you change it
again (referred to as default setting).

•

Set the speaker, headset, handset, or group listening loudness
for all future calls using the following steps:

— press ITCM,
— choose speaker, headset, handset, or group listen mode to be

affected,

— while in that mode, press VOLUME UP or VOLUME

DOWN to adjust loudness,

— dial

✳ ✳

5 to hold the loudness at the last setting for all future

calls (until it is changed again),

— repeat this procedure in each mode until all default volume

levels have been properly set.

NOTE: You may adjust the volume of a call in any mode (over

speaker, headset, handset or group listen), at any time during
the call, by pressing VOLUME UP or VOLUME DOWN.
When the call ends, the volume of all future calls is reset to the
programmed (default) setting.

Using The Other Telephone Features

Impression LCD Speakerphone – 75

Содержание Impression

























































































































Результаты поиска

Содержание Impression

Отзывы:

Похожие инструкции для Impression

Бренды по названию

Популярные бренды

Comdial Impression, Справочное руководство системы

Результаты поиска

Содержание Impression

Отзывы:

Похожие инструкции для Impression

Бренды по названию

Популярные бренды