We bring good things
to
life.
EQUIPMENT APPROVAL INFORMATION
Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in
compliance with parts 15 and 68, FCC Rules and Regulations and the Technical
Requirements
forTelephoneTerminal Equipment published by ACTA.
1 Notification to the Local Telephone Company
On the bottom of this equipment is a label indicating, among other information, the US number and Ringer
Equivalence Number (REN) for the equipment. You must, upon request,
provide this information to your
telephone company.
The REN is useful in determining the number of devices you may connect to your telephone
line and still have
all of these devices ring when your telephone number is called. In most (but not all) areas, the sum of the
RENs of all devices connected to one line should not exceed 5. To be certain of the number of devices you
may connect to your line as determined
by the REN, you should contact your local telephone company.
A plug and jack used to connect this equipment to the premises wiring and telephone network
must comply
with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord
and modular plug is provided with this product. 11 is designed to be connected to a compatible modular jack
that is also compliant. See installation instructions
for details.
Notes
This equipment may not be used on coin service provided by the telephone company.
Party lines are subject to state tariffs, and therefore, you may not be able to use your own
telephone
equipment if you are on a party line. Check with your local telephone company.
Notice must be given to the telephone company upon permanent disconnection of your telephone from
your line.
If your hom~ has specially wired alarm equipment connected to the telephone line, ensure the installation
of this product does not dIsable your alarm equipment. If you have questions about what will disable alarm
equipment consult your telephone company or a qualified installer.
Rights of the Telephone Company
Should your equipment cause trouble on your line which may harm the telephone network, the telephone
company shall, where practicable, notify you that temporary discontinuance of service may be required. Where
prior notice is not practicable and the circumstances warrant such action, the telephone company may
temporarily discontinue service immediately. In case of such
temporary discontinuance, the telephone
company must: (1) promptly notify you of such temporary di~continuance; (2) afford you the opportunity to
correct the situation; and (3) in~orm you of your right to bring a complaint to the CommiSSion pursuant to
procedures set forth In
Subpart E of Part 68, FCC Rules and Regulations.
The telephone company may make changes in its communications facilities, equipment, operations or
procedures where such action is required in the operation of its business and not inconsistent with FCC Rules
and Regulations. If these changes are expected to affect the use or performance of your telephone equipment
the telephone company must give you adequate notice, in writing, to allow you to maintain uninterrupted
service.
INTERFERENCE INFORMATION
This device complies with Part 15 of the
FCC RUles. Operation
Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference; and (2) This device must accept any interference received.
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits ar~ designed to proVide reasonable protection against harmful
interference in a residential Installation.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna (that is, the antenna for radio or television that is "receiving"
the interference).
Reorient or relocate and increase the separation between the telecommunications equipment and receiving
antenna.
Connect the telecommunications equipment into an outlet on a circuit different from that to which the receiving
antenna is connected.
If these measures do not eliminate the interference, please consult your dealer or an experienced radioltelevision
technician for additional sug9,estions. Also, the Federal Communications
Commission has prepared a helpful
booklet, 'HowTo Identify and Resolve RadiolTV Interference Problems:' This booklet is available from the U.S.
Government Printing Office, Washington, D.C. 20402. Please specify stock number 004·000·00345-4 when
ordering copies.
US NUMBER IS LOCATED ONTHE CABINET BOTTOM REN
NUMBER IS LOCATED ONTHE CABINET BOTTOM
WARNING:TO
PREVENT FIRE OR
ELECTRICAL SHOCK
HAZARD, DO NOT
EXPOSETHIS
PRODUCT TO RAIN
OR MOISTURE.
.
'1"_
I
RISK OfELECTRIC
SHOCK
I
A
OONOTOPEN
A
THE LIGHTNING
CAUTION: TO REDUCE THE
THE
EXCLAMATION
FLASH ANO
RISK OF ELECTRIC SHOCK,
POINT WITHIN THE
HEAD WITHIN THE NOT REMOVE COVER (OR
TRIANGLE IS A
TRIANGLE IS A
BACK). NO
WARNING SIGN
WARNING SIGN
SERVICEABLE PARTS
ALERTING YOU OF
ALERTING YOU OF REFER SERVICING TO
IMPORTANT
"DANGEROUS
QUALIFIED SERVICE
INSTRUCTIONS
VOLTAGE" INSIDE
PERSONNEL.
ACCOMPANYING
THE PRODUCT.
THE PROOUCT.
SEE MARKING ON BOTTOM
I
BACK OF PRODUCT
Model 29888
16018110 (Rev. 1 E/S)
03-15
INTRODUCTION
CAUTION:
W
hen using telephone equipment, there are
basic safety instructions that should always be followed.
Refer to the IMPORTANT SAFElY INSTRUCTIONS
provided with this product and save them for fi.nure
reference.
Your Digital Messaging System is designed to give you
flexibility in use and high quality performance. To get the
most from your new messaging system, we suggest that you
take a few minutes right now to read through this instruction
manual.
BASE LAYOUT
PLAY/MEMO button or MESSAGES
indicator
STOP/SET
button
VOLUME
button
GREETING/
PREVIOUS
button
NEXT
button
ON/OFF ERASE button
MIC
BEFORE
You
BEGIN
PARTS CHECKLIST
Make sure your package includes the following items:
Digital messaging system
TELEPHONE JACK REQUIREMENTS
To use this phone, you need an RJ11C type
modular telephone jack, which might look
like the one pictured here, installed in your
home. If you don't
have a modular jack, call your local
phone company to find out how to get
one installed.
IMPORTANT INSTALLATION INFORMATION
•
Never install telephone wiring during a lightning storm.
•
Never touch non-insulated telephone wires or terminals,
unless the telephone line is disconnected at the network
interface,
•
Use caution when installing or modifying telephone lines
(attached to the back of the digital messaging system).
IMPORTANT INSTALLATION GUIDELINES
•
Install messaging system near both a telephone
(mOdular) jack and an electrical power outlet.
•
Avoid sources of noise, such as a window by a busy
street, and electrical noise, such as motors, microwave
ovens, and fluorescent lighting,
•
Avoid heat sources, such as heating air ducts, heating
appliances, radiators, and direct sunlight.
•
Avoid areas of excessive moisture or extremely low te
m peratu res.
•
Avoid dusty locations,
INSTALLING THE MESSAGING SYSTEM
Choose the best location to install your messaging system. Your
messaging system should be placed on a level surface
such as a desk or table top,
