Comdial Impression, Справочное руководство системы

Страница: 94 / 120

9.1 Programming For Automatic
Dialing —continued
The outside numbers and feature codes are commonly referred to as
autodial numbers when they are stored at the programmable button
locations; however, they are referred to as personal speed dial numbers
when they are stored at the 10 keypad number locations. The intercom
extension numbers are referred to as direct station selection (DSS)
numbers. Plus, the light associated with the DSS button is referred to
as the busy lamp field (BLF) light.
•
Before you begin programming, write down:
— write down the intercom or outside line you will use to access
the number,
— write down the telephone number, extension number, or
feature code you are storing.
•
As you program numbers,
— fill in the identification strips on your telephone,
— fill out the charts on the next page for a personal record of
your stored numbers.
NOTE: The telephone system allows only one autodial number at a
programmable button; however, you can store an autodial
number or feature code at a second level of a location where a
DSS is already stored; just repeat the programming procedure.
1 2
4
7
0
8 9
5 6
3
#
ABC
GHI
PRS
OPER
TUV WXY
JKL
MNO
DEF
SPKR
HOLD TAP ITCM
T/C MUTE
unisyn14.cdr
B1 B2 B3
B4 B5 B6
A1 A9
A2 A10
A3 A11
A4 A12
A5 A13
A6 A14
A7 A15
A8 A16
Autodial Button Locations
Programming Your Telephone
88 – Impression LCD Speakerphone