Comdial Impression, Справочное руководство системы

Страница: 18 / 120

2.2 Creating The LCD Response Messages
When you are busy or are away from your desk, you can set a message
at your telephone that will be received by any LCD speakerphone
within your system. Your system provides two default messages:
Back at . . . and Call . . . . In addition, you can add eight customized
messages, or you can create up to ten messages if you choose not to use
the two default messages.
NOTE: If you intend to create a response message to a voice announce,
remember that this is also a message, and that it uses one of
your message locations.
•
To store the LCD messages, proceed as follows:
— write your messages on the chart on page 15 (each message
can have up to 16 characters),
— use the letter code table (on page 14) to assign a number to
each letter,
— write these numbers on the chart line beside the
message letters,
— press ITCM,
— dial
✳
# 05,
— dial a message location number (0–9),
— dial # to clear current message,
— compose your messages by dialing the two-digit codes that
relate to the letters,
— dial
✳
to save message,
— dial next location number, # to clear it, two-digit codes for the
message, and
✳
to save,
— repeat previous step until all messages are stored,
— press SPKR to end.
Programming The Attendant Features
12 – Impression LCD Speakerphone