background image

 

www.combisteel.com 

Safety Instructions and Warnings 

1.

 

To avoid injury or damage to the Steak Ager, two or more people should unpack together. 

2.

 

If the product is damaged during transportation, please contact the supplier immediately before use. 

3.

 

All packaging must be removed before use to avoid poor grounding or increased noise. In order to ensure 
the stability of the aging machine, please adjust the product feet according to the placement of the ground. 

4.

 

The product design is upright, and it needs to maintain adequate ventilation at the rear of the Steak Ager 
when placed, so as to facilitate heat dissipation. 

5.

 

Built-in product to remove surrounding obstacles and maintain air circulation. 

6.

 

The four cabinet feet of the product are adjustable. It is recommended that you adjust the height of the rear 
two  cabinet  feet  to  the  maximum,  and  then  adjust  the  front  two  cabinet  feet  to  reach  balance.  When 
adjusting the height, the product must be empty. 

7.

 

LED is only for product interior lighting, not for room lighting. 

8.

 

When product is built-in installation. please keep the ventilation plinth open. 

9.

 

When the Steak Ager is not used for a long time, be sure to empty the contents and clean them with water 
to keep the whole machine clean. 

10.

 

In addition to the method recommended by the Manufacturer, no mechanical equipment or other methods 
should be used to accelerate the defrost process (such as blowing, shoveling, etc.). 

11.

 

Do not damage the refrigeration piping. 

12.

 

Except for the type recommended by the Manufacturer, electrical appliances shall not be used in the food 
pantry of the appliance. 

13.

 

Do not store explosives in Steak Ager, such as combustion-supporting sprays. 

14.

 

If the power cord is damaged, in order to avoid danger, non-original professional authorized personnel or 
personnel with professional licenses may not repair and replace the product, please contact the supplier 
immediately. 

 

Danger 

1.

 

Pay attention to the danger that children may be trapped in the box 

2.

 

Do not let children operate the product alone 

3.

 

Do not use electrical equipment (such as heater, electric ice maker, etc.) inside the product 

4.

 

Do not place any electrical appliances or heavy objects on top of the product 

5.

 

Do not move the product when it is not empty, as this may deform the product 

6.

 

Please  install  the  product  in a  place  where  the  power  socket  is  accessible,  and  the  compressor  can’t  be 
touched 

7.

 

If the power cord or lamp is damaged, in order to avoid danger, it is forbidden to use electricity 

8.

 

If any breakdown occurs, please disconnect the product from the main power supply, pull out the plug, do 
not pull the cable, turn off or remove the fuse 

9.

 

Prohibit the use of flammable sprays near the product 

10.

 

Forbidden to damage the refrigeration pipeline. If the refrigerant in the pipeline splashes into the eyes, it 
will cause serious injury. 

11.

 

Do not use flammable liquids to clean the product, flammable liquids and its steam will cause fire hazard 
and cause explosion 

12.

 

WARNING —When positioning the appliance, ensure the supply cord is not trapped or damaged. 

13.

 

WARNING —Do not locate multiple portable socket-outlets or portable power supplies at the rear of the 
appliance. 

14.

 

WARNING — The refrigerant and insulation blowing gas are flammable. When disposing of the appliance, 
do so only at an authorized waste disposal centre. Do not expose to flame. 

 
In order to avoid danger, non-original professional authorized personnel or personnel holding professional 
licenses shall not repair or replace the product. 
 

 

Содержание 7525 Series
























Отзывы: