12
www.combisteel.com
Temperature Display Board Operating Instruction
Instructions for LED panel operation
① Function switch button:
Press one time ,the window ④ and window ⑤ to switch temperature and humidity function, and press the
button ⑥ or ⑦ to increase or decrease temperature and humidity.
② ON/OFF the power button:
Press the button 3 seconds to power off. Remark: The other functions will turn off except light switch when the
power turns off. Press again (without delay), the power turns on.
③ UV system control instruction
1.
Automatic control: The steak ager is power on. If the UV light doesn’t be turned on by human, the UV light
will turn on for every 24 hours. The times will be 1 hour. It means every 24 hours, the UV light will be on
1 hour.
2.
Manual control: The steak ager is power on. Please press this button 3 seconds, the UV light will be always
on. Please press light button 3 seconds again, and then the UV light will turn off.
3.
When the UV light turn on,the UV light will be closed when door is open,and it will be on when door is
closed.
Note: The life of the UV lamp is 12 months. Exceeding the service life will greatly reduce the antivirus effect
of the UV lamp.
④ Display Window: Display actual temperature,
⑤ Display Window: Display actual humidity
⑥ Temperature/Humidity setting up button :
Press one time, Temperature /Humidity will increase 1 degree Celsius / 1%RH.
⑦ Temperature/Humidity setting down button :
Press one time, Temperature /Humidity will decrease 1 degree Celsius / 1%RH.
⑧ C/F display conversion function keys:
Set the conversion degrees Celsius / Fahrenheit display, each press this button, the display window will be into
degrees Celsius or Fahrenheit.
