22
www.combisteel.com
Installation Method of Ventilation Plinth
Note: Not all products need to install the ventilation plinth by themselves, please follow the configuration of the
actual purchased product.
1. Take the front ventilation plinth out of the product and take out 4 screws from the accessory bag
2. Open the door, align the ventilation plinth with the four screw holes at the bottom of the cabinet, and
tighten the screws with a Phillips screwdriver
Operation Anomalies
Ensure that there is power to the electrical supply plug by connecting another electrical appliance to it. Check
fuse, if any. Make sure that the door is closed properly.
If your Steak Ager appears to be malfunctioning, unplug it and contact your after sales service. Any intervention
on the cold circuit should be performed by a refrigeration technician who should carry out an inspection of the
circuit sealing system. Similarly, any intervention on the electrical circuit should be performed by a qualified
electrician.
Note: Any intervention performed by a non- authorized technician We will lead to the warranty being
considered as null and void.
Power Failures
In the event of a power interruption, all previous temperature settings are automatically preservation and it will
revert to a preset temperature setting. (See preset chart)
Most power failures are corrected within a short period of time. An hour or two’s loss of power will not affect
Steak Ager’s temperatures. To avoid sudden change of temperature while the power is off, you should avoid
opening the door. For longer period of power failure, do take steps to protect your meat or food.
Irrespective of the cause, if you notice either abnormal temperature or humidity levels inside your Steak Ager,
be reassured that only long and frequent exposure to these abnormal conditions can cause a detrimental
effect on your meat or food.
