INSTALLATION GUIDE FOR RA-5200
RA-5200 QI
Copyright - refer to title page
Page 61
ENU Status : 1-0-0
4.3.3.2 Communication Link
Refer to Reference 0.6.3 for communication link.
4.3.4 DESCRIPTIONS OF PARAMETERS
After successful connection of the OMT to the equipment, equipment parameters can be read and/or
set.
Parameters include: Common Information, RF Information, Alarm Information, Properties Information
and Other Information.
The figure below presents “Master Alarm” interface of Alarm Information group as an example:
Fig 32: RF Info. --- Pre-ATT
4.3.4.1 Common Information
Common Info.
includes: System Info, (Password), (Logout), Auto-Read. Different parameter has
different interface, which can be displayed by clicking the nodes in [Equipment Information Tree].
Click the [System Information] node in the [Equipment Information Tree] area to view the system
information.
Click the [Auto Read] node, a window will be shown on its right, in which user can define which
parameters to be read automatically and the time interval for each read operation. Refer to Reference
0.6.3 OMT v3.20 Software Product Manual for detailed information.
Node Name
Description
[System Info] Allows selection of information between master or remote equipment
[Auto-Read]
System will automatically query the selected parameters based on the setting time
interval
Refer to Reference 0.6.3 OMT v3.20 Software Product Manual for the specific description of other
Common Information.
