COMAC C100 ESSENTIAL Series, Руководство по эксплуатации и обслуживанию

Страница: 27 / 40

RECOMMENDED MAINTENANCE OPERATIONS
Before performing any routine or extraordinary maintenance operation, proceed as follows:
1. Take the machine to the maintenance area.
N.B.
: the place given over to this operation must comply with current environmental protection regulations.
2. Make sure the machine is in a safe condition (see chapter “ MACHINE SAFETY MEASURES ”).
CAUTION : it is recommended to wear the appropriate PPE (Personal Protective Equipment) for the work to be carried out.
27
INTERVAL MACHINE COMPONENTS PROCEDURE
DAIL
Y; BEFORE
A LONG PERIOD OF
INACTIVITY
Squeegee
Clean the vacuum chamber; the squeegee rubber blades; the vacuum nozzle (see
“ CLEANING THE SQUEEGEE BODY ”).
Scrubbing brush head body lateral
splash guard rubber blades
Clean the scrubbing brush head body lateral splash guard rubber blades (see
“ CLEANING THE SCRUBBING BRUSH HEAD LATERAL SPLASH GUARD
RUBBER BLADES ”).
Scrubbing brush head body brushes
Clean the brushes on the scrubbing brush head body (see “ CLEANING THE
SCRUBBING BRUSH HEAD BODY BRUSHES ”).
Recovery tank
At the end of every working day, empty the recovery tank (read “ EMPTYING THE
RECOVERY TANK ”).
At the end of every working day, after having emptied the recovery tank, clean the
vacuum system filters (see “ CLEANING THE RECOVERY TANK FILTERS ”).
Solution tank
At the end of every working day, empty the solution tank (read “ EMPTYING THE
SOLUTION TANK ”).
WEEKL
Y
Machine water system
Clean the filter in the machine's water system (see “ CLEANING THE WATER
SYSTEM FILTER ”).
Squeegee rubber blades
Check that the rubber blades on the squeegee body are intact and inspect for wear;
if necessary, replace these (see “ REPLACING THE SQUEEGEE BODY RUBBER
BLADES ”).
Scrubbing brush head body splash
guard rubber blades
Check that the rubber blades on the lateral splash guards of the scrubbing brush
head body are intact and inspect for wear; if necessary, replace these (see
“ REPLACING THE SCRUBBING BRUSH HEAD BODY SPLASH GUARDS ”).
Scrubbing brush head body brushes
Check that the brushes on the scrubbing brush head body are intact and inspect
for wear; if necessary, replace these (see “ REPLACING THE SCRUBBING BRUSH
HEAD BODY BRUSHES ”).
MONTHL
Y
Squeegee rubber blade levelling
Check that the rubber blades on the squeegee body are level and if necessary,
adjust these (see “ ADJUSTING THE SQUEEGEE BODY RUBBER BLADES ”).
Levelling the scrubbing brush head
body splash guard rubber blades
Check that the rubber blades on the lateral splash guards of the scrubbing brush
head body are level and if necessary, adjust these (see “ ADJUSTING THE
SCRUBBING BRUSH HEAD BODY LATERAL SPLASH GUARDS ”).