Single brush machines
E 400 S Duo Speed
19
–
Take care that the ventilation slots of the motor on the machine body are not clogged so that good cooling
of the motor is assured.
–
Take care that the bumpers on the machine body fit tightly and are in the right place.
–
Check the cables, plug and socket regularly for damage (e.g. wear, scorch marks, etc.).
9 Troubleshooting
WARNING! Risk of injury!
The appliance may put people and objects at risk. Work on and with the appliance may only be
carried out by properly qualified personnel in accordance with all the safety instructions given in
Chapter "Safety"!
Before troubleshooting, switch off the appliance and pull out the mains plug, where necessary.
Fault
Possible cause
Remedy
Mains plug not connected correctly
Check plug on correct connection.
Machine does not work
Mains plug not properly in the socket
Push the mains plug properly into the
socket
The thermal release caused the mo-
tor to switch off
Allow appliance to cool down for 5 to
10 minutes.
Motor faulty / Relais faulty
Contact the manufacturer.
Machine is not running smoothly Cleaning tool is contaminated
Check cleaning tool on dirt. If
necessary disconnect or wash with
water.
Cleaning tool is worn out unevenly
Fit a new cleaning tool.
Cleaning tool is not centred in the
catch
Check the correct positioning of the
cleaning tool. If necessary, centre the
cleaning tool on the drive disc.
Machine gyrates, out-of-balance
Cleaning tool is not assembled
correctly.
Check the correct positioning of the
cleaning tool. If necessary remove
and refit the cleaning tool.
10 Accessories
The following accessories can be obtained from the manufacturer:
•
Scrubbing brushes of different brush strengths
•
Drive plates for pads
•
Vacuum units with suction ring for vacuuming dry, non-poisonous dusts
•
Container tanks for cleaning and floor care fluids
•
Cleaning and floor care products for different applications
•
Spray device
•
Pads
•
Extension cable
Detailed information about our accessories can be found in our price list.