Single brush machines
E 400 S Duo Speed
12
6.3 Assembly of accessories (Optional)
6.3.1 Assembling the spray device (Optional)
1
Fig. 5 Spray can
Fill the spray can
ATTENTION!
The wrong detergent can damage the appliance. The following
should be observed:
•
Only use detergents approved by the manufacturer.
•
Never fill the spray can with liquid wax.
•
Never fill in liquids that are warmer than 40
°°°°
C!
1. Hold firm the spray can at the bottom.
2. Rotate the lid (1) counter-clockwise to screw it off.
3. Fill detergent in the spray can.
4. Screw lid on the spray can.
6.3.2 Assembling the spray device
9
Risk of injury from rotating parts!
Before carrying out any assembly work, switch off the appliance
and pull out the mains plug.
1. Fix the 4 holders (1) at the handle bar (2) with a distance of 85 mm. Use
a hexagonal spanner. Make sure that the holders are parallel to the han-
dle (3).
2. Put the sprayer with the bracket into the holders.
3. Fix the spraying nozzle (5) with the spraying nozzle holder between
bumper (7) and housing (8).
4. While working, pump with the level (9) to apply spray medium.
NOTE!
Please observe the correct position of the spray nozzle. The spray
nozzle must be directed forward and diagonally to the bottom.
WARNING! Risk of injury by slipping!
Move carefully on floors where detergents have been used.
Fig. 7 Assembling the spray device