Single brush machines
E 400 S Duo Speed
11
6 Assembly
WARNING! Risk of injury!
The appliance may put people and objects at risk. Work on and with the appliance may only be
carried out by properly qualified personnel in accordance with all the safety instructions men-
tioned in the chapter of "Safety"!
Before any assembly work is carried out, switch off the appliance completely and pull out the
mains plug.
6.1 Before assembly
Before assembly, check that all parts required for operation have been
delivered.
Scope of delivery
1
Guide bar with power cable
2
Machine body
3
Operating manual
4
Spare parts list
1
3
4
2
Fig. 4 Scope of delivery
6.2 Assembly of the guide bar
Führungsstange montieren
»
6
7
5
1
4
4
3
2
2
Fig. 5 Assembly of guide bar
1. Unscrew the four nuts (6) from the threaded bolt (3) on the guide
bar and machine body. Use a ring or a flat spanner SW 13 (7).
2. Position the holding fixture (1) of the guide bar (5) onto the
threaded bolt (3).
3. Fix holding mechanism. Screw the two nuts (6) back on the
threaded bolt (3) and tighten them.
Make sure that the holder sits flat on the machine body and is
tightly fixed.
4. Plug the mains plug (4) into the socket (2) provided.
NOTE!
To bring the guide bar into a different position after assembly,
pull the positioning lever and swivel the guide bar into the
required position. Then release the positioning lever again.