Columbus Instruments Exer 3/6, Руководство по оборудованию

Страница: 12 / 60

12
Treadmill Hardware Manual 1011-0002 v1.02
•
Using one screw and nut, connect the two braces together in the middle. Do not tighten. The screw
and nut should hold the braces closely together but allow them to move.
•
Using four screws with nuts, connect the legs and the braces together in the orientation as shown.
Again, do not tighten. The screws and nuts should hold the pieces closely together but allow them to
move.
•
Now, apply pressure to force the rubber feet of the legs apart and tighten the two screws and nuts
near the feet. This will hold the feet farthest apart for better stability.
•
Position the assembled Downhill Adapter with the braces on the bottom next to the bottom of the
treadmill as shown and secure with the remaining 4 screws and nuts. Tighten completely.
•
Reposition the spring pin from the hole at the bottom to the hole in the middle of the Inclination Rod.