manualshive.com logo in svg

Colortrac SmartLF Gx+ 28, Инструкция по установке и эксплуатации

Поделиться
Скачать
Colortrac SmartLF Gx+ 28 Скачать руководство пользователя страница 26

   Colortrac SmartLF Gx+ Range Installation and Operating Manual                                                                            26 
                

  

PAS176                                                                                                                      P/N: P005530 Colortrac Ltd © 2010  

 

Configuring Gx+ Utilities for use via Ethernet 

 

1.  Connect the USB cable (do not connect the Ethernet at this stage) 

2.  Wake the scanner if necessary by pressing the Cancel button 

3.  Click the Connection button gear symbol (circled)  

4.  On the Connection screen c

heck „Use Ethernet to connect‟  

5.  Enter the Command Port value (default is 17236) 

6.  Enter the Data Port value (default is 17237)  

7.  Click OK 

 
 
 
 
 
 
 

 

8.  Power off the scanner 

9.  Connect the Ethernet cable and disconnect the USB cable 

10.  Switch on the scanner 

11.  Run Utilities.  You may notice a small time delay. 

 

If Gx+ Utilities cannot detect the scanner if will offer the operator the chance to change the communication settings. 
 
To use Ethernet all Colortrac software must be reconfigured by the user from the USB2 default.  If the scan software 
fails to connect to the scanner the time-out function will allow the operator to inspect / change the settings.  Refer to 
the following for more details.  
 
Checking the Ethernet settings using the operating system. 
 
The connection can be checked from the DOS prompt by 
typing 

netstat 

– a

 followed by 

<ENTER>

.   

 
 
The IP address of the host computer (200.2.1.29), scanner (200.2.1.128) and the ports shown here as 17236 and 
17237 should all be visible. 
 
 
 

IMPORTANT:

 If a scanner is switched on with USB and Ethernet interfaces connected, the USB interface will become 

the active interface.  If a USB cable is plugged into a working Ethernet configured scanner the scanner will 
automatically switch to USB as the active communications interface.  Utilities and other applications configured for 
Ethernet will then 

report „No Scanner‟ or time out.  

 
To restore Ethernet operation switch off the scanner, remove the USB cable and restart the scanner.  If there are 
problems re-establishing an Ethernet connection it may be necessary to power cycle the Ethernet switch. 

 
 
Always switch the scanner OFF before changing from USB to Ethernet or Ethernet to USB. 
 

TCP  200.2.1.29:57726    213.120.163.168:http   ESTABLISHED 
TCP  200.2.1.29:57751    wy-in-f100:http        ESTABLISHED 
TCP  200.2.1.29:57752    wy-in-f100:http        ESTABLISHED 
TCP  200.2.1.29:57755    200.2.1.128:17236      ESTABLISHED 
TCP  200.2.1.29:57756    200.2.1.128:17237      ESTABLISHED 

Содержание SmartLF Gx+ 28










































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды