12
6,
3D
: Check “
Enable 3D
”; “
Right First
” is the system default in video mode; then set up
Control
Area
, namely the right row and right column of each net port; all parameters of
Signal Delay Time
set up to be 0. As follows:
Right column
=
X+Y/2+Z (X is column origin of each output port; Y is the width of sender
resolution; Z is depth of field, DOF is generally set to 4 points or 8 points, should not be set up
too large, otherwise it may cause the viewer to feel dizzy).
Right row
=row start point of each port.
7,
Other
:
Advanced Parameters
are prepared for experts for special applications settings, no operation
is allowed for non-professionals.
Advanced Parameters
mainly include parameters as follows:
Zero
Frame Delay, Better Graylevel On Low Brightness, Connection Parameters, Fade Time, Video Bit
Wide (
Default “8bit”)
.
