8
③
Clipping
Select signal source of the image that needs to be clipped in
Input Signal Area
, click
[Set]
to
enter the clipping interface.
In the clipping interface, check
[Clipping]
, set X, Y, width and height, then click
[Save]
to
complete.
④
Splicing
Select DVI signal source in
Input Signal Area
, click
[Set]
to enter the splicing interface; there is
only one specific splicing mode, set width and height of splicing unit of it, then click
[Save]
to
complete.
Note: Splicing is only available for DVI signal source.
