Colorjet VerveLED VLY 2513, Инструкция по установке и устранению неисправностей

Страница: 49 / 56

Page | 48
VERVE LED
Ink Supply System Maintenance
Follow the below instruction for maintaining the ink supply system
•
Appearance Inspection
o
Check for any leak between joints, ink tanks and valve seating.
o
Check for any cut on ink tubes.
•
Filter Replacement
o
Check the disk filters which should be changed after 3 months or 800 hours working.
•
Ink Tank and Pump Cleaning
o
Check for ink impurities in the ink pumps and clean the pump with flush water to avoid
ink clogging
Computer Maintenance
Follow the instructions for computer maintenance:
•
Select the advance configuration computer to perform printing operations.
•
High-speed interface card should be used.
•
Install the necessary control procedures, processing software, and antivirus software in the
computer for speed operations.
•
Should use the advance backup control software and relative procedures for security purpose.
•
Do not use computer to surfer the internet.
•
Do not insert or pull out USB cable when machine or computer is ON.
Using and Maintenance of Print Head
Print head is a key component of the printer, must use and maintain it correctly, so that can guarantee
good printing effect and print head life. Pay attention to potential problems caused by environment, heat
and moisture, collision, cleaning etc.
Follow the instructions given below for long life of the machine:
•
Print head should work with environment temperature 18~28, humidity 35%~80%, dust-free and
exhaust condition.
•
Keep the carriage exhausted to ensure the print head with optimum heat abstraction.
•
Print head nozzle is made of thin film, thus be careful while storing, loading, unloading, cleaning,
and soaking, to prevent it from collisions or short circuit.
•
Prevent print head from severe shock, otherwise it will damage the piezoelectric ceramic
oscillation in the head.
•
Print head must be cleaned by flush water to remove ink stains and stoppage.
•
Keep the print head in a liquid to avoid dry out situation.
•
Keep the print head away from light to avoid dry out situation.
•
Prevent the object or human body with static contact the print head.
•
Print head nozzles should be keep away from hands, ink, flush, etc.
•
Should be kept clean and prevent oxidation.