Collomix VISCO 550, Инструкция по эксплуатации

Страница: 16 / 24

VISCO 550 Collomix GmbH
16 Version 1.1-17
8. Cleaning, maintenance, and repair
It is necessary to check, clean, and service the machine regularly to ensure continuous function.
Unplug the machine from power by pulling the plug before all cleaning, maintenance, and repair work
is done on the machine.
8.1 Cleaning
Remove any spilled mixed compound immediately from the interior of the machine. For this purpose
use a rag or a scraper. Be careful not to damage any connections or sensors.
Dirty threaded spindles can be cleaned with a rag or a wire brush. When you have finished cleaning
the threaded spindles, lubricate them again with ESSO BEACON EP .
Do not use grease which contains molybdenum, graphite, Teflon or MoS2 component for the
lubricating of the threaded spindles. These components can damage the plastic spindle nuts
durably.
CAUTION
Damage to the machine through dry run ball bearings
If you clean the machine with a high-pressure washer, the lubricant is washed out from the ball
bearings and they run try.
• Never clean the machine with a high-pressure washer or similar.
• Replace dry-run ball bearings immediately.
8.2 Maintenance
Every week:
• Remove any dirt from the machine.
• Check that the locking lever (5) moves smoothly and lubricate lightly with grease.
Every 6 months:
• Check the clamping plate top (1) and bottom (2) for wear and tear, replace if necessary.
• Check and clean the slide pull out mechanism (3). Lubricate lightly with grease.
• Clean dirty threaded spindles (4) with a rag or a wire brush. After cleaning, lubricate them again
with ESSO BEACON EP.
•
Check that all ball bearings move smoothly. Ball bearings are to be found on the two clamping jaws,
on the drive shaft at the transmission gear and on the clamping tables.
•
Check the tension of the V-belt. Replace the V-belt if it is worn or damaged.
1
Clamping plate top
2 Clamping plate bottom
3
Slide pull out
4 Threaded spindles
5
Locking lever
4
1
3
2
5
Cleaning and maintenance