background image

 

 

VISCO

 

550

 

 

Collomix GmbH 

 

 

8

 

Version 1.1-17 

 

3.3

 

Foreseeable Misuse 

Any reasonably foreseeable misuse, which can be hazardous for the user, third parties, or for the 

biaxial mixer are: 

 

 

The use of the biaxial mixer and its accessories contrary to the intended use. 

 

The use of damaged containers or containers not suitable for mixing.  

 

The mixing of explosive substances. 

 

The use of substances, which react chemically with one another; in particular, expanding 

substances. 

 

The use of the equipment outside the physical use limitations described in the Chapter 

"Commissioning / Operating". 

 

The modification of the control software without the prior coordination with Collomix GmbH. 

 

Modifications on the biaxial mixer as well as add-ons and retrofits without the prior coordination 

with Collomix GmbH. 

 

Operating the system contrary to the requirements of the Operating Instructions concerning 

safety information, installation, operation, servicing, and maintenance, set-up, and malfunctions. 

 

Bridging or decommissioning of safety and protective actions of the system. 

 

Operating the system if malfunctions are obvious / with obvious malfunctions  

 

Repair, cleaning, and maintenance work without disconnecting the system from power. 

 

WARNING 

Danger of injury through improper modifications 

Hazards exist through unauthorized modifications to the system and the use of third party spare 

parts.  

 

Use only original spare parts and accessories of the manufacturer. 

 

Do not change, add to, or retrofit the system without the consent of the manufacturer.

 

 

 

 

3.4

 

Qualifications of operating personnel 

These Operating Instructions are directed toward operators and personnel with the following areas 

of competency: 

 

Working area 

Expertise 

Installation, transport and storage 

Specialised staff 

Commissioning, decommissioning 

Trained personnel 

Operation 

Trained personnel 

Servicing and maintenance 

Specialised staff 

Troubleshooting 

Specialised staff 

Definition acc. to DIN EN 60204-1: 
Trained personnel: 

A person, who was instructed by an expert in the responsibilities he or she has been assigned and any 

possible hazards in case of improper behaviour and a person, who was trained in the necessary 

protective devices and protective actions, if needed. 

Expert staff: 

Persons who can evaluate the work assigned to them and recognize possible dangers on the basis of 

their specialised training, knowledge, experience, and familiarity with the relevant norms. 

Содержание VISCO 550

























Отзывы: