Collomix VISCO 550, Инструкция по эксплуатации

Страница: 11 / 24

Collomix GmbH VISCO 550
Version 1.1-17 11
6. Operation
Prior to working with the machine, check all parts for their proper condition and function. Do not start
the machine with defective or missing parts. Remove all accessories, tools, and other loose parts from
inside the machine.
Check all safety-relevant structural components of the machine for proper function before starting it.
Any defective or damaged parts must be replaced by qualified personnel prior to starting to work with
it.
6.1 Switching on the machine
The machine is turned on using the main switch (3).
After an automatic initialisation, READY is shown on the display.
Any errors detected during initialisation are shown in text form on the display.
6.2 Load a container
Only use sufficiently stable and tight-closing vessels for mixing. In case of doubt, consult the
manufacturer of the mixing vessels.
To place the container, proceed as follows:

Unlock and open the door by pushing the DOOR button.

Unlock the lower clamping table (7) by pressing the locking lever (8) to the left and pulling it
forward.

If the mixing container is higher than the position of the clamping table, press button E to widen
the mixing unit.

Observe the weight and size limits of the mixing vessel. Never overload the machine!

The mixing container must be properly placed into one of the guide rings of the centring adapter
plate at the lower clamping table.

In case no guide ring fits, the container cannot be mixed. In this case, please ask the producer to
provide a suitable centring adapter. Place the container centrically on the mixing table and

Secure the container handle with a rubber band or an adhesive.

Use only undamaged containers, never stack containers!

Push the clamping (7) table back into the machine until it latches in place.
Do not stack containers!
Mixing container
Placing the Mixing
container
Securing the handle with
a rubber band
Handle fixation