background image

 

 

VISCO

 

550

 

 

Collomix GmbH 

 

 

6

 

Version 1.1-17 

 

2.

 

About this document 

This instruction uses symbols and labels, which should make it easier for you to find information 

swiftly. Please read the explanations in the following Section. Please read the safety and warning 

information in these instructions especially carefully. Safety information is in Chapter 2. You find 

information on warnings in the introduction of Chapters and before instructions. 
Collomix GmbH owns the copyright of images and text. 
Please read the operating instructions prior to first use. Pay attention to safety instructions. Keep for 

future use. This documentation is not subject to change services. 

2.1

 

Pictograms and symbols 

Warnings 

The following symbols and signal words are used in this documentation. 

Symbol 

Meaning 

DANGER 

 

This signal word is used, if death or severe physical injuries is the result of 

not paying attention to the corresponding precautionary measures. 

WARNING 

 

This signal word is used, if death or severe physical injuries may result 

from not paying attention to the corresponding precautionary measures. 

ATTENTION 

 

This signal word is used, if slight physical injuries occur from not paying 

attention to the corresponding precautionary measures. 

CAUTION 

This signal word is used, if malfunction of functions or property damages 

may occur from not paying attention to the corresponding precautionary 

measures. 

IMPORTANT 

This signal word is used for easing operation or for pointing to references. 

Structure of warnings 

DANGER 

The first line describes the type and source of danger. 

The second line describes the consequences which occur if no actions are taken to avert the danger. 

 

The last line describes the actions to take in order to avoid the danger.

 

 

 

 

 

WARNING 

Danger of injury through disregard of safety symbols 

Ignoring the warnings on the equipment and in the operating instructions can lead to injuries and 

additional risks. 

 

Pay attention to the warnings on the equipment and in the operating instructions.

 

 

 

 

Содержание VISCO 550

























Отзывы: