Collomix Rühr- und Mischgeräte Gmbh
Shaker
V
IBA
15
&
V
IBA
25
D-85080 Gaimersheim
Edition
2.3-05
33
10.4
Maintenance checklist
Maintenance checklist for the VIBA
Machine number
Counter total:
Date of maintenance:
Location of the machine
Maintenance technician
Cleaning the machine
Clean the inside and the outside of the machine
Remove paint residues from the spindle with a steel brush
Inspections
Check the drive belt for wear and tension
Check the flange and pedestal bearings of the crankshaft for wear
Check the shock absorbers
Check the upper and lower spindle bearings
Check the toothed belt of the clamp motor for ear and tension
Lubricating the machine
Lubricate the flange and pedestal bearings of the crankshaft with a grease gun (BEACON EP2)
Lubricate the threaded spindles (MOLIKOTE BR2+)
Miscellaneous
Replace the fuses on the pcb: S1, S2 = 6.3 AT 250V; S3 = 4.0 AT 250V
(use only sand-filled, flow fuses)
Add more spare fuses as required
Carry out a function test with a large and a small container
Comments
Date:
Signtaure of the maintenance technician: