Cointra SIENA, Инструкция по установке и эксплуатации

Страница: 34 / 52

SIENA
34 A73021514
EN EN EN EN
IMPORTANT:
- In order to avoid overheating, do not cover the heater.
The heater itself is marked with the standard
"Do not cover" symbol.
- You must not sit on the emitter.
- This appliance is not intended for outdoor use.
- If the power cord is damaged, it must be changed by the
manufacturer, its after-sales service or persons qualified to
do so, to avoid possible danger.
- The emitter should not be located underneath an electrical
connection. The electric supply line should be protected with
a high sensitivity differential device.
- The emitter must be installed so that around it there is suf-
ficient space for proper circulation of hot air, always respect-
ing the minimum distances indicated in the LOCATION sec-
tion. Anyone who is in the bathtub or shower should not
have access to the switches and other power operation de-
vices, respecting 0.6 m distance between the emitter and
the bath or shower.
- Mounting is an important part of safety. To perform the cor-
rect installation, go to MOUNTING section.
- This heating apparatus holds a specific amount of special
oil. Repairs where it is necessary to open the oil tank must
only be made by the manufacturer or your service aftermar-
ket, which should be normally contacted in case of any oil
leakage.
- This appliance can be used by children aged 8 years and
above and persons with reduced physical, sensory or mental