Cointra SIENA, Инструкция по установке и эксплуатации

Страница: 42 / 52

SIENA
42 A73021514
EN EN EN EN
5.3. Operating modes
By successively pressing the mode key the emitter is changed from one mode to another.
To identify the mode a screen is initially displayed for 2 seconds.
COMFORT:
ECONOMY:
ANTI-FROST:
PROGRAM:
The first mode of operation that appears when the emitter is connected for the
first time, and changed from Standby to Operational, is "
comfort
".
In this mode, the desired room temperature is selected by
-
and
+
keys,
between
12
°
C and 30
°
C
in steps of 0.5 ° C (if the keys are held, the temperature changes
faster). When the temperature reaches either the maximum or minimum value it
will stop.
Typical comfort temperature is 20-21 °C. The comfort mode is normally used dur-
ing the hours the room is occupied.
The next mode that appears is " economy ", which automatically sets a tempera-
ture between 0.5 °C and 4.5 °C less than the previously selected comfort temper-
ature (the difference can be directly set by the user with the
- and + keys). When
the comfort temperature is raised or lowered, the ECO temperature automatical-
ly rises or falls by the set amount.
While the comfort temperature can be set from 12 °C to 30 °C, the ECO tempera-
ture is from
7.5 °C to 29.5 °C , but always between 0.5 °C and 4.5 °C below the
comfort temperature.
Economy mode is used for short absence periods to prevent the temperature
from falling excessively.
I
n this mode, the temperature setting is 7 °C and is factory set.
Anti-frost is usually used as an off set point and for long periods
of absence when you want to avoid freezing.
In Program mode, the emitter automatically switches between the 3 mode
temperatures according to the daily and weekly program set by the user.
The bar chart is displayed permanently and displays the 24-hour program di-
vided into one-hour intervals. Each one-hour interval can be programmed as
comfort , eco or heating off . The bar showing the current time flashes to indi-
cate to the user what the current set point is.
mode
mode
mode