Cointra SIENA, Инструкция по установке и эксплуатации

Страница: 45 / 52

SIENA
A73021514 45
EN EN EN EN
5.6. Manual mode
The manual mode allows the user to manually operate the emitter and override the current set-
ting. It can boost the emitter to heat or not for a set amount of time. After the time expires the
emitter will return to the previous mode of operation.
The manual mode is designed to allow a user to override the Program mode without having to
change the program itself. For example, if you arrive when the emitter is normally unheated, you
can heat the space to a comfortable temperature, and then have the emitter return to its normal
mode without changing the program.
To enter Manual mode press and hold the
OK key for 2.5 seconds, then using
the - and + keys enter the amount of time you want to force the emitter to heat
or not.
The edition is circular, from half an hour to 365 days. The steps are:
-
Half an hour from 00:30 to 12:00
-
1 hour from 12:00 to 1 d
-
1 day from 1 d to 365 d
To confirm the time required, the
OK key will be pressed.
The desired temperature can then be set using the
- and + keys; any tem-
perature between 7 °C to 30 °C (in steps of 0.5 °C) can be entered. Unheated
mode can be entered from either 7 °C or 30 °C by entering
- or + keys once
from each extreme. Unheated is indicated by the standby icon and 4 dashes
on the screen (----). If no key is pressed within 30 seconds before final con-
firmation, the emitter will return to the previous mode of operation.
When the desired temperature is entered confirm with the
OK key.
ON will be displayed.
The selected time will remain on the display and count
down until it is finished, and with the standby or sun icon
depending on whether temperature set point or unheated
mode has been selected, as well as the temperature itself in
case of forced heating. Although you cannot change the set time, it is possible to change the set
point temperature during the operation of manual mode using the
– and + keys.
Once the set time has elapsed, the emitter will automatically return to the previous mode of op-
eration.
To exit manual mode at any time, the
OK key should be pressed. OFF will be displayed.
5.7. Open Window function
When the Open Window mode is enabled in the configuration menu the
emitter automatically stops heating when it detects a sudden drop in tem-
perature (4 °C in 20 minutes). This is normally caused when a window or
door is opened to the outside without turning off the emitter.