15
6X-1099Z1
•
Click on the “Start Discovery” button. A list of Cameras will be automatically displayed.
•
Select your camera network settings.
NOTE:
Use the MAC Address to identify Cohu cameras. “00-09-f2” identifies cameras as Cohu cameras.
4.5 Checkout Procedure
When the power is applied to the Camera the initialization process begins. All Cohu Cameras initialize on
power-up using stored default parameters within the camera’s non-volatile memory. The default IP address
assigned to the Cameras at the factory is 192.168.2.150. For information on accessing the Camera using
the Helios Web Interface see section 5.2.
If the Camera does not operate when the power is applied, check for:
•
Proper input voltage
•
Proper cable connections
After communication with the Camera has been established and video stream has been started, various
functions should be tested to verify proper operation.
Contact the Customer Service Department for technical assistance:
