Coherent Solutions SwitchBlade, Руководство пользователя

Страница: 19 / 40

Modular Optical Switch | SwitchBlade
Coherent Solutions | SwitchBlade (V1.4) 15
10 Test Instrument Manager Software
Home page
When the Test Instrument Manager is run, the Home
page is displayed. The devices on the network
automatically show up.
Click and drag the desired MTP1000 devices from
‘
Discovered Instruments ’ to the ‘ Monitored
Instruments’ list to enable management of these
devices, this opens the main Test Instrument
Manager interface.
Figure 22 - Test Instrument Manager Start-up Device
Select
Note : If there are no devices listed in the ‘Discovered Instruments’ list, refer to section ‘Refresh’ for instruction
on how to detect your MTP1000 devices.
10.1 Test Instrument Manager Interface
1. Device Selection
2. Main Display
3. Switch Selection
Control
4. Routing Control
5. Fiber Type Display
6. Other Menu Buttons
Note : The Switch Selection
Control (3) and Fiber Type
Display (5) are not
populated until a selection
of switches has been made,
see below.
Figure 23 - Test Instrument Manager Interface
10.2 Device Selection
The Device Selection menu lists all the devices that were selected for management in the Device
Instruments interface.
Click the drop-down box and select the desired device to be the currently managed unit. This unit will now be
shown in the
Main Display .
2
3 4
5
6
1
6