Barcode Blaster printers are manufactured by
Cognitive, an Axiohm Company
691 Corporate Circle • Golden, CO 80401
TEL: (303) 273-1400 • FAX: (303) 273-1414
Copyright © 1999 by Axiohm, Inc.
Barcode Blaster™ is a trademark of Axiohm, Inc. Microsoft
®
and Windows™ are
trademarks of Microsoft Corporation. Other product and corporate names used in this
publication may be trademarks or registered trademarks of other companies, and are used
only for explanation and to their owner’s benefit, without intent to infringe.
All information in this manual is subject to change without notice, and does not represent
a commitment on the part of Axiohm, Inc. No part of this manual may be reproduced for any
purpose or in any form, including electronic storage and retrieval, without the express
permission of Axiohm, Inc. All program listings in this manual are copyrighted and are the
property of Axiohm, Inc., and are provided without warranty.
FCC Notice
This equipment has been tested and been found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
CE Notice
Warning
This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
Note:
This manual does not contain printer programming
information. A disk containing the Cognitive Intellidriver
™
, a
Windows driver for Cognitive printers, is shipped with every
Barcode Blaster printer. The Intellidriver lets you print labels
directly from your favorite Windows applications, without
programming.
For those who do want to control their printer directly, a file
called
PROGGDE
.
HLP
on the disk contains printer programming
information in Windows Help format. You can load and read
this file using
WINHELP
.
EXE
provided with Microsoft Windows
3.1 or above. Please refer to your Windows documentation
if you do not know how to do this.
If you need programming information and are not using
Windows (or cannot read the Help file for any other reason),
contact our Technical Support Services Organization for
assistance. Contact information is on page 14.
