Cognex DMA-EZCCM-001 Скачать руководство пользователя страница 49

Страница: 49 / 50

Regulations/Conformity

Product Identification

These instructions apply for the following compact serial interface modules:

DMA-EZCCM-001

Scope of Delivery

The delivery scope contains:

DMA-EZCCM-001

Legal Requirements

The device falls under the following EU directives:

2014/30/EU (electromagnetic compatibility)

2011/65/EC (RoHS II Directive)

Safety and Regulatory

Manufacturer

Hans Turck GmbH & Co. KG
Witzlebenstraße 7
45472 Muelheim an der Ruhr
Germany

Safety

The product is designed according to state-of-the-art technology. However, residual risks still exist. Observe the following

warnings and safety notices to prevent damage to persons and property. Cognex accepts no liability for damage caused

by failure to observe these warning and safety notices.

Intended Use

The devices are only intended for use in industrial applications.

The DMA-EZCCM-001 devices provide a multiprotocol Ethernet interface for EtherNet/IP™ and PROFINET. The

DataMan interfaces are used for connecting devices Cognex DataMan Barcode Readers. Additionally, the module

provides 4 universal digital input channels.

The devices may only be used as described in this manual. Any other use is not in accordance with the intended use.

Cognex accepts no liability for any resulting damage.

General Safety Instructions

The device may only be assembled, installed, operated and maintained by professionally trained personnel.

The device may only be used in accordance with applicable national and international regulations, standards

and laws.

The device only meets the EMC requirements for industrial areas and is not suitable for use in residential areas.

Regulations/Conformity

Содержание DMA-EZCCM-001


















































Результаты поиска

Содержание DMA-EZCCM-001

Отзывы:

Похожие инструкции для DMA-EZCCM-001

Бренды по названию

Популярные бренды

Cognex DMA-EZCCM-001, Руководство пользователя

Результаты поиска

Содержание DMA-EZCCM-001

Отзывы:

Похожие инструкции для DMA-EZCCM-001

Бренды по названию

Популярные бренды