Cognex DMA-EZCCM-001, Руководство пользователя

Страница: 35 / 50

1. Select the DMA-EZCCM-001 in the "Device view".
2. Select "Ethernet addresses" in the register tab "Properties".
3. Assign the desired IP address.
Connecting the device to an EtherNet/IP™ PLC
The following hardware components are used in this example::
l
Rockwell PLC ControlLogix 1756-L60
l
Block module
The following software tools are used in this example:
l
Rockwell RS Logix
l
L5K that is available within the install files of Setup tool
Prerequisites:
l
The programming software has been started.
l
A new project has been created with the PLC and the Scanner mentioned above.
l
The PLC has been added to the project.
Commissioning the Device in EtherNet/IP™:
Features Description
Number of TCP connections 1
Number of CIP connections 1
Input Assembly Instance 101
Output Assembly Instance 110
Configuration Assembly Instance 1
35
Connecting