Cognex DMA-EZCCM-001, Руководство пользователя

Страница: 30 / 50

l
Write in User Data the Input String you want to use eg. SET INPUT-STRING.VALUE <STX>123<ETX>
l
Trigger soft event
Advanced Features
l
Reading Input Channel
l
The DMA-EZCCM-001 has two input channels and each has 2 input lines, on pin 2 and pin 4.
l
Each of the 4 inputs can be traced back to the PLC so that it tracks any signals coming from the conveyor.
l
Blocking ST connection
l
Once the Setup tool will tunnel through the device to connect to a reader, the serial connection for the
industrial network connection will be disrupted.
l
To avoid this “Force RUN mode” bit from “Trigger Control” can keep the PLC connection alive and disable
the possibility to connect over Setup Tool.
30
Getting Started