Cognex DMA-EZCCM-001, Руководство пользователя

Страница: 48 / 50

Precautions
To reduce the risk of injury or equipment damage, observe the following precautions when you install the Cognex
product:
l
Route cables and wires away from high-current wiring or high-voltage power sources to reduce the risk of
damage or malfunction from the following causes: over-voltage, line noise, electrostatic discharge (ESD), power
surges, or other irregularities in the power supply.
l
Changes or modifications not expressly approved by the party responsible for regulatory compliance could void
the user’s authority to operate the equipment.
l
Ensure that the cable bend radius begins at least six inches from the connector. Cable shielding can be
degraded or cables can be damaged or wear out faster if a service loop or bend radius is tighter than 10X the
cable diameter.
l
This device should be used in accordance with the instructions in this manual.
l
All specifications are for reference purposes only and can change without notice.
l
The device may only be assembled, installed, operated and maintained by professionally trained personnel.
l
The device may only be used in accordance with applicable national and international regulations, standards
and laws.
l
The device only meets the EMC requirements for industrial areas and is not suitable for use in residential areas.
48
Precautions