Cognex 1AAU Скачать руководство пользователя

Страница: 43 / 44

Cleaning/Maintenance

Clean the Housing

To clean the outside of the vision system housing, use a small amount of mild detergent cleaner or isopropyl alcohol on

a cleaning cloth. Do not pour the cleaner on the vision system housing.

CAUTION

Do not attempt to clean any In-Sight product with harsh or corrosive solvents, including lye, methyl ethyl

ketone (MEK) or gasoline.

Clean the Vision System Image Sensor Window

To remove dust from the outside of the image sensor window, use a pressurized air duster. The air must be free of oil,

moisture or other contaminants that could remain on the glass and possibly degrade the image. Do not touch the glass

window. If oil or smudges remain, use a cotton bud and alcohol (ethyl, methyl, or isopropyl) to clean the window. Do not

pour the alcohol on the window.

Clean the Cover

To remove dust from the lens cover, use a pressurized air duster. The air must be free of oil, moisture or other

contaminants that could remain on the lens cover. To clean the plastic window of the lens cover, use a small amount of

isopropyl alcohol on a cleaning cloth. Do not scratch the plastic window. Do not pour the alcohol on the plastic window.

Cleaning/Maintenance

Содержание 1AAU













































Результаты поиска

Содержание 1AAU

Отзывы:

Похожие инструкции для 1AAU

Бренды по названию

Популярные бренды

Cognex 1AAU, Справочное руководство

Результаты поиска

Содержание 1AAU

Отзывы:

Похожие инструкции для 1AAU

Бренды по названию

Популярные бренды