English
15
8.3 Main function menu (FUNC)
The projector gives the opportunity to change and customize some functional settings.
FUNC
DIMM.
Dimmer mode: it can simulate dimmer effect with Tungsten or Xenon
lamp.
TUNG
XENO
ID
It allows to set the ID number of the unit by + and – keys; “enter” key to confirm.
Da 1 a n°
TEST
DISP
It allows to turn 180° the reading of the display. HOLD
locks the keys. Press any key for 5” to
unlock.
RVRS
HOLD
AA/VV
ON/OFF
-Store
DIMMER
STROBE
0 - 255
0 - 255
D.MAX
RESE
DFSE
Disables the adjusting of the leds setting them at maximum output.
It permits the reset of the unit. Keeping pressed ENTER and MENU at the
turning on of the unit It allows to access ALIG features.
It restores all the settings at default value excepting of led settings and hour
meter.
ON
OFF
enter
SURE
LED
AUTO allows to turn off the display after 6 seconds
AUTO
ON
FRE
It allows to set the flickering frequency from 1000 to 5000 Hz besides
the default value. (NOTE: DMX signals goes ahead this setting)
From
1000
to
5000
