English
16
8.4 Measures and test s(MEAS)
The internal microprocessor of Reflection LEDko P allows for several diagnostic and output paramenter to be displayed.
MEAS
It shows the temperatures detected by the probe on the led module:
It shows the volt value of the power of the unit.
It measures the DMX value (0-255) received by each DXM channel of
the unit.
Reading of the typical DMX 512 value called “RATE”
(frequency of signal updating in milliseconds).
It shows the error message of the alarm in progress.
It shows the luminous efficiency of the LEDs
M1234.
It shows the led’s life values in hours: LIF.R led module life (resettable),
LIFE life of total modules installed on the unit since now (not resettable)
UNIT life of the projector.
It shows the led’s emission frequency. It may be useful if frequency must
be set due to flicker issues.
TEMP
VOLT
DMIN
RATE
ALRM
LED
HOUR
FRE
DIMM: 100%
CH1: 80%
CH2: 30%
CH3: 10%
CH4: 100%
It shows the actual software version installed on the unit.
VERS
