English
17
8.5 User settings (MODE)
8.6 Connecting DR1 and DR1 Plus
All features are available in the menu can also be activated by DR1 (code CO9707) and DR1 Plus (cod.CO9709). DR1 and DR1
Plus is a tool designed for technicians who can operate the apparatus at the same time the programmer of the show, without
having to physically intervene on headlamps, but controlling functions remotely.
For example, DR1 and DR1 Plus eliminates the need to change a DMX address on the unit, (thus avoiding the technical climbing
on the structure) and can read hours of lamp life and other functions normally accessible from the display. DR1 and DR1 Plus also
allows updating the firmware of the projectors.
To enable a projector to work with DR1 or DR1 Plus, you must set each unit of the line with its own, unique identity number (ID).
WARNING !
- If you set as identification number "0 ", Reflection LEDko P will not be recognized by DR1 and DR1 Plus
- Never assign the same ID to two or more units of a same DMX line. This causes the failure of the system. (DR1 and DR1
Plus will display an error message).
For more information see the manual for DR1 or DR1 Plus.
8.7 Electronic alignment of the leds.
The display panel of
Reflection LEDko P
allows the electronic alignment of the leds, this procedure is performed by Coemar at the
time of testing, this procedure may be useful for special effects or in case of replacement of internal components (PCBs, leds, etc.
...). Altering the settings made by Coemar may radically alter the functioning of the projector’s functions.
Carefully read the following prior to attempting any changes.
WARNING !
This chapter should be considered for the exclusive use of technicians and qualified personnel.
MODE
DMX
It restores to DMX the functioning
of the unit.
A001
