Each
Panorama C
yc 1800
A
rchitectural
utilises
5 channels of DMX 512 signal for complete control.
To ensure that each unit accesses the correct signal, it is necessary to correctly address each fixture. Any number between 1
and 506 can be generated via the multifunction panel of the
Panorama C
yc 1800
A
rchitectural
.
When powered up initially, each projector will show
A001
which indicates
DMX address 1
; a projector thus addressed
will respond to commands on channels
1
to
5
from the
DMX 512 controller
. A second projector should be addressed
as 6 a third as
11
and so on until the final
unit
has been addressed.
altering dmx addresses
1) Press the + or - button until the display shows the
DMX
required, the characters in the display panel will flash to indicate
that the selection is not stored in memory.
2) Press the enter button to confirm your selection; the display will stop flashing and the projector will now respond to the
new DMX address.
3) To better understand the function of each channel, we refer you to section 11 “Control channel functions from a DMX
512 controller”.
Important Note
: Keeping the
+
or
-
button pressed will cause the display to alter at increased speed, allowing a faster
selection to be effected.
enter
menu
10. DMX addressing
English
