CODEL Tunnel Tech 700 Series, Техническое руководство

Страница: 51 / 81

Technical Manual
CODEL
41
10 is the date
02 is the month
16 is the year
6.1.5. Target Board : Displays the Circuit Board information that Software
Version on the instrument supports.

Use or to scroll through to Target Board.
Example of target board number format in screen shot “803441A” red
as
“803-441” is the circuit board number.
“A” is the board revision.
6.1.6. Press to exit from ID submenu.
6.2. Comms : These are Serial Communication and communication protocol
settings on the instrument and are read only. The following are submenus.

Comms

Comms (B, D, P, S)

Protocols

Comms Address

Use or to scroll through to Comms.
6.2.1. Comms (B, D, P, S) : Displays serial communication parameters.
B - Baud Rate.
D - Data Bits
P - Parity
S - Stop Bits

Use or to scroll through to Comms.

In the above screenshot baud rate is 9600, Data bits are 8,
Parity is 0 and Stop bits are 1.
6.2.2. Protocols : Displays communication protocol used to communicate to
the instrument.

Use or to scroll through to Protocols
6.2.3. Comms Address : Is the communication address of the instrument.

Use or to scroll through Comms Address.
Target Board:
803441A
2. Parameters
2.2. COMMS
Comms (B,D,P,S):
9600,8,0,1
Protocols:
CODEL