Code Flame 384, Руководство пользователя

Страница: 3 / 21

CODE Flame 384 User’s Manual
http://www.codelight.com 1
Summary
CODE Flame 384 scanner console is specially designed to control the various scanners. To adopt double CPU
work in coordination, high speed MCU proceed the precise control to achieve 16Bit X/Y movement. Up to 16
scanners may be connected with a maximum of 24 channels each. Multi scenes and multi Chase programs can be
operated at the same time, and 16 scanners can be selected simultaneously. It is equipped with two groups of
DMX 512 signals and is adapted for wide range of power voltage. The edit mode and running mode of the console
are convenient and flexible. So it is easy to edit and to handle. Flame 384 is the best suit for art show, theater,
dancing and acting.
Features
DMX512/1990 standard, 384 DMX control channels.
2 output with optical isolated
，
withstand 2000Vrms. Independent slot structure, which is easy to change.
Up to 16 scanners may be connected with a maximum of 24 channels each.
A large backlight LCD to display operation parameters.
24 sliders for channel, 1 slider for speed control.
1600 Chase steps, 48 Chases, up to 100 steps each. Each step contains its speed and cross time, can
be set respectively. Trigger mode selectable: Music synchronously and manual speed.
Cooperating with the Chase speed slider, the time of the program step can be changed from 0.03s to
180s.
48 scanner scenes can be used directly.
8 Chases, 48 scenes operated at the same time. At most 16 scanners can be selected simultaneously.
The X/Y channels of different scanners can be controlled by modulation wheel.
16Bit control for absolutely precise movement.
The music trigger source can be selected between audio line input or inside microphone.
Easy to edit and handle.
USB Flash Drive enable user to backup the show in a file
The Data auto-saves.
High performance switching power supply, with extremely low power harmonious distortion and wide
range of voltage, suit for the requirement of different country.
Explanation for Reading
For reading convenience, some signs and usual displays are specially defined as following:
xxx expresses a key ， like HOLD .
When the parameter is inside [ ] on display ， like [012] ， the parameter is the current choice.
Press xx + yy ， expresses press xx key first and hold ， then press yy key.
X/Y control is named Pan/Tilt also. In the Manual, it is X/y, the control of X axis/Y axis.
When the key indicating light is on, it indicates that the key has been pressed, chosen or the function is
effective.
When the indicating light is blink:
BLACKOUT, EDIT function key--emphasizes the function.
Scanner number key-- expresses that the computer is in a hold state.
Scene section key and Chase section key - indicate that when multi scenes and multi Chases are
running, there are scene or Chase running on the section.